Emergency Fire Alarm Repair in Austin, TX | Nursing Homes & Assisted Living
When a fire alarm system fails at a nursing home or assisted living facility, restoring reliable operation is an urgent life-safety priority. Avenger Security Services provides emergency fire alarm troubleshooting, control panel repair, system testing, inspections, and UL-listed monitoring in Austin and Central Texas.
Recent Austin emergency: water-damaged fire alarm control panel
Avenger Security was called to investigate an inoperable Silent Knight IFP-75 fire alarm control panel at an Austin-area senior living facility. Our investigation identified two failed water heaters in the attic directly above the panel. Water overflowed from their drain pans, entered the fire alarm control panel, and damaged its internal electronics.
We identified the source of the failure and ordered compatible replacement panel equipment. Before the replacement can be installed, the facility must have the water heaters and drainage problems repaired and the area dried. This project is an active repair, not a completed restoration.
Emergency fire alarm repair for nursing homes and assisted living facilities
Fire alarm reliability is particularly important in residential care occupancies, where some residents may need staff assistance during an emergency. A damaged control panel may interrupt detection, notification, sprinkler monitoring, and communications to the monitoring station.
When a required fire alarm system is impaired, facility management should promptly coordinate the applicable impairment notifications and temporary protective measures with the relevant authorities while repair is arranged.
Repair the existing system when practical
A failed panel does not automatically require replacing every detector, notification appliance, and wire in a building. Avenger Security evaluates the cause of failure and the condition and compatibility of existing equipment before recommending repair, component replacement, or broader upgrades.
We work with existing Silent Knight, Farenhyt, Fire-Lite, Notifier, and other conventional and addressable fire alarm systems, including older equipment where compatible replacement parts can be sourced.
Complete system testing after panel repair
Restoring power to a panel is only part of the job. Following repairs, we can perform functional testing of connected smoke and heat detectors, manual pull stations, notification appliances, sprinkler waterflow and supervisory interfaces, standby batteries, and central station communications. We also verify that alarm, supervisory, and trouble signals are classified and reported appropriately.
Inspection and tagging results depend on the condition of the complete system. Any additional deficiencies discovered during testing are documented for correction.
Fire alarm inspections and UL-listed monitoring
Avenger Security offers general fire alarm inspections starting at $350, depending on system size and scope. Inspection schedules and requirements depend on the facility's licensing classification, adopted codes, and applicable authorities, including Texas Health and Human Services where relevant.
We also provide 24-hour commercial fire alarm monitoring for $75 per month through a UL-listed central monitoring station, with no long-term monitoring contract and 90 days' cancellation notice. We can coordinate sprinkler and extinguisher inspections with appropriately licensed fire protection contractors.
Emergency fire alarm repair in Austin and Central Texas
We serve Austin, Round Rock, Pflugerville, Georgetown, Cedar Park, Hutto, Leander, and surrounding communities. Whether your fire alarm panel has water damage, a power supply failure, persistent trouble signals, or a communication problem, contact Avenger Security to evaluate practical repair options.
Avenger Security Services, Inc.
Emergency Fire Alarm Repair | Austin, Texas
Phone: 512-563-5361
Email: brandon@getsecurityalarm.com
Texas Fire Alarm License ACR-2370373